How do I do this? It has two glass handles. There's no screw on top of the handles. They are just covered in glass. Do I need a handle puller? If so, ...
How do I do this? It has two glass handles. There’s no screw on top of the handles. They are just covered in glass. Do I need a handle puller? If so, what type.
How can I put new handles on to it? Would most handles of similar size work?
I removed the metal handle, and now I’m looking at a white and gray plastic part? what do I do next? the cold water isn’t working so I’m looking to clean it out to see if that helps. thanks.
I have an American Standard single handled kitchen faucet (it looks like a pretty cheap model). I removed the plastic cap on top of the handle and removed the screw on top of the handle and the handle will not come off no matter how hard I pull on it. All of the directions online show a screw underneath the handle, my faucet does not have that. I have removed the only screw I can find. I’m driving myself nuts trying to figure this out, pretty soon I may resort to a sledge hammer 
Thank you, prying it up gently with a flat screw driver did the trick and saved my sanity
The handle has become very stiff that it is hard to turn to switch to hot or cold water. I took out the screw on top of the handle in order to clean it but the handle itself won’t come off. I don’t want to force it in case I break something.What can I do to fix it?
It is a price pfister, single handle pullout faucet (no side sprayer), it seems all of sudden I started losing pressure, particularly on the hot water side. The pressure in the rest of the house is fine. Any ideas why this would happen and how to fix it? I cleaned the aerator but that didn’t do anything.
I removed the set screw on the handles but still cannot remove handle from stem, Any suggestions?
This is a 2 handle faucet. It leaks cold water continuously. It has a cartridge in the handle about the size of a C cell battery, with 2 o-rings on it. There are no rubber cups or springs in the assembly. I changed the lower o-ring but it still drips water out the faucet when the handle is closed.
while the cold water was running I bumped the sprayer and the faucet stopped letting water through altogether. I have tried taking the sprayer apart, but I can’t get water to come out of anything. I am getting water coming up to the faucet from the supply below the sink. The faucet is just a standard kitchen faucet, a cold handle, a hot one, and the sprayer. It was bought from Kmart five years ago, any suggestions to get the water to flow again?
I had thew water supply on, as it was running when it happened,. I took the sprayer head off with everything as it was when the faucet was working, and I am not getting anything to come out now, but I can feel the water coming up from the supply, I can feel the temperature differences.
When I say the sprayer, I am referring to the clack spray extension, not the actual faucet itself where the water comes out when the faucet is turned on.
I have a price pfister faucet in the kitchen that is broken at the top, where the handle is meant to turn to release the water, I am having trouble opening it up so I can take a closer look at it. I wanted to replace it but I do not know how to open it and I do not have a manual. Please help
It has lost aeration and I would like to know where to look for series or model # to access parts list and/or disassembly instructions to attempt cleaning or repair. Thanks
I noticed about a week ago that my kitchen water temperature was lukewarm. I have a single handle faucet in the kitchen sink.
All the faucets in my apartment are that way. I checked the water temperature in the bathroom. It is coming out hot in the bathroom sink and shower. The hottest temperature in the kitchen faucet is lukewarm.
My husband thinks that it could be something wrong with the mixer valve in the faucet itself. Does the faucet need replacing in the kitchen? Will a new faucet solve the temperature problem?
Thanks for any answers.
The hot water valve is opened all the way.
So it’s not the hot water valve. It’s horrible doing dishes. I have to boil water to make sure they’re sanitary. I will inform the landlord about the faucet. He is quick to get repairs done.
I have a portable dishwasher and need to hook it up to a faucet that is a one handle with the sprayer attached as part of the spigot like this:
http://www.homedepot.com/Kitchen-Kitchen-Faucets/Price-Pfister/h_d1/N-5yc1vZ1xiyZar0kZ16z/R-100678516/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
I need to attach a portable dishwasher to this and cannot figure out what type of adapter I need. I heard there is a rubber adapter but cannot find it at Lowe’s or Home Depot. Any advice?
I just purchased and installed a Price Pfister Florentino 2 lever kitchen faucet. When turning off the hot water, the lever rotates beyond the off position and gets out of alignment. I keep having to unscrew the handle, realign it and tighten it back in place. But it quickly get turned around again with normal use. What should I do to fix this permanently??